1 Answer. It is a safety switch designed to prevent the drum from turning while the door is open. If the switch were removed and the circuit closed by connecting the wires the drum will turn and the dryer will work.
How much does it cost to replace a dryer switch?
Dryer Repair Cost by Type of Replacement
| Replacement Part | Average Costs (Labor Included) |
|---|---|
| Door Switch | $50 – $150 |
| Vent | $75 – $150 |
| Roller | $100 – $150 |
| Thermostat | $100 – $200 |
What would cause a dryer to not turn on?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board:
- Problems with the door switch can prevent the dryer from starting.
- A blown thermal fuse often prevents an electric dryer from starting.
What happens if the switch on my dryer is broken?
Faulty Switch. As a safety feature, the dryer will not work with an open door. When the switch is broken, it is unable to tell the control panel the door is shut, so the dryer will not turn on. The only way to tell if the switch is faulty is to take it out of the dryer and test it with a multimeter.
How do you replace a door switch on a dryer?
You will want to install the replacement switch in the direction the old switch was facing. If you open the dryer door and look up, you should see the door switch and the two Philips screws that hold it in. Remove these screws. You should be able to lift the door switch up from the dryer frame.
What should I do if my tumble dryer door wont shut?
Place the new latch / catch and replace the fixing screw. This is a very easy repair to do. Step 3 – Ensure the door lock is in the open position (see below pic) if it is in the locked position you will need to get it into the open position so the mechanism will work properly. To do this take a piece of sturdy wire and make a hook on the end of it.
How do you remove the back panel of a dryer?
Pull the control knob straight up and off of the front of the push-to-start switch. Pull the push-to-start switch knob off. 03. Move the dryer forward and use a 1/4-inch nut driver to remove the screws from the back panel. Remove the back panel from the dryer and set it aside. Remove the screws from the panel at the back of the dryer console.
