To reset a bulb you switch it on and off four times and leave it on about one to two seconds each time. After the fourth time the bulb will strobe. After strobing is done turn off and turn back on. The bulb is now reset back to factory settings and you can pair it to a home network again.
How do I connect my magic home light to WIFI?
Ensure at least one smart light in the device list, and enable your lights for remote control. On “Home” Page, long-press the light to rename. Click “Home control” on “ Home” APP. Select “Magic Home Wi-Fi” The account and password must be the same as the one you created in Magic Home Pro APP.
Why are my magic home lights not working?
4) Lights Won’t Pair With the Magic Home App To fix this error simply go into your mobile setting and clear all app data. After that, open the app back up and start the pairing process again and you should have no trouble getting the lights to connect to your Magic Home app.
Why can’t I connect to my LED lights?
Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it.
Why won’t my LED lights connect to Bluetooth?
Try to reset the light strip. Reset: Press the middle button on the control box for four times while holding the power button. 3. Please try to unplug the light strip for 10 mins, then re-plug it.
How do you reset LED lights without remote?
How To Reset LED Strips
- Plug your LED strips in and turn it on for a few seconds.
- Turn it off then take out the power adaptor without turning off the remote control.
- Press and hold the power button for a few seconds then connect the power supply again.
How can I Reset my magiclight WiFi bulb?
To fix this, you can reset the bulb’s wifi by following these steps: 1. Power in the bulb. 2. Wait 3-5 seconds and then power off the bulb. 3. Repeat the above 1 and 2 steps for four times.
Is the Magic home WiFi controller still working?
I recently got three of these working with the Android Magic Home app and Alexa. Today, one of the units is showing offline and the LEDs are turned on. I unplugged the power momentarily and the LEDs are still on and Magic Home shows it offline. I also tried stopping and starting the Android app with no change.
How to install the Magic home WiFi app?
App install A: 1: download the free app “Magic home wifi” from APP store or Google play 2: you can install the app from below link: 3: you can even scan the QR code from below: B: 1:Screw the MagicLight wifi bulb in E26 lamp holder, and turn on it
How can I Reset my Deco WiFi system?
You can conveniently reset or reboot your Deco Whole-Home Wi-Fi System physically or through the Deco app. From the Dashboard in the Deco app, tap the Deco unit that you want to reset, and then tap the button in the top right corner. Click Remove to reset the Deco unit.
